SBS Self-Adhesive Waterproof Membrane Production Line

SBS self-adhesive waterproof membrane production line

Modified bitumen waterproofing membrane is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moistureprof. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon store and does not generate greenhouse gases. The membrane is therefore a sustainable way of storing carbon on the Earth's surface.

Working principle

The whole working principle can be divided into 3 steps.
1.To mix the bitumen,rubber powder , talcum powder , enginee oil and some other raw materials via mixing tanks(the mixing tank should be kept warm by conduction oil).The finished mixtures can be called bituminous mixtures .
2.The bituminous mixtures will be delivered into coating pools.Then the base material(reinforcement ) will be coated with the bituminous mixtures.At last ,the coated reinforcement will be covered by PE film or sand or other materials.At that time ,the bitumen membrane preliminary forming.

3.The finished products will be cooled by water and air,then be rolled by auto winder.

Self-Adhesive Waterproof Membrane

Introduction

SBS(Styrene Butadiene Styrene) /APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as SBS, APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc.

Emulsioned Asphalt Plant

The emulsified asphalt equipment is desioned according to years of experience and the development .It is a  new modified emulsified asphalt production line, production of 18-20 tons / hour.

The equipment consists of: Modified asphalt agitator tank,Metering device,Bitumen pump,Asphalt pump,Valve Pipeline ,Automatic valve,Oil pump,Colloid mill,Colloid mill circulating valve,Feeding platform,10#Iron asphalt tank,100#Iron asphalt tank,Talcum powder tank,oil storage,Screw powder hoist,Power distribution cabinet system,Electric wire,Feeding electric hoist and runway,Boiler,Tank, pipe insulation,and Heat conduction oil.

Automatic Winding Machine

Features
Speed	Width available	Direction of delivering
4rolls/min	1m	Left/Right
Introduction: Frequency computer programming,touch screen synchronization control. Automatic sent automatically,count,japan,all bearing tape and volume. When operation,automatic cycle,step by step,manually operated can be selected. Meet different capacity of the waterproofing membrane. High safety.
Auxiliary machine(not included)
Traction device	Jumping device
Function Ensure the automatic winder machine running properly. Reduce the tension of the machine,Prolong the service life of the automatic winder machine.

SBS Self-Adhesive Waterproof Membrane Production Line

SBS self-adhesive waterproof membrane production line

Modified bitumen waterproofing membrane is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moistureprof. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon store and does not generate greenhouse gases. The membrane is therefore a sustainable way of storing carbon on the Earth's surface.

Working principle

The whole working principle can be divided into 3 steps.
1.To mix the bitumen,rubber powder , talcum powder , enginee oil and some other raw materials via mixing tanks(the mixing tank should be kept warm by conduction oil).The finished mixtures can be called bituminous mixtures .
2.The bituminous mixtures will be delivered into coating pools.Then the base material(reinforcement ) will be coated with the bituminous mixtures.At last ,the coated reinforcement will be covered by PE film or sand or other materials.At that time ,the bitumen membrane preliminary forming.

3.The finished products will be cooled by water and air,then be rolled by auto winder.

Our company are polyethylene membrane waterproof suppliers​

Our company are polyethylene membrane waterproof suppliers

High polymer polyethylene polypropylene fiber water proof roll material is made from polyethylene, strong polypropylene fiber , non-woven fabrics, and inhibitor and the other polymer raw material. It is forced out to form a shape by automate product line. The roll material middle.

Layer is water proof layer and aging resistant layer. Up surface and down surface is strong adhesive layer. Then it will combine with accessional self developed glue. It is stable ,without edge, no empty drum, double layer water proof. It becomes a whole polyethylene polypropylene fiber polymer cement water proof system

APP waterproofing membrane manufacturers

On the basis of absorbing foreign advanced science and technology, our factory has developed various kinds of advanced waterproof equipment plants, and has got many national patents.Our company are APP waterproofing membrane manufacturers.
APP modified asphalt waterproof membrane is a waterproofing modified bitumen base sheet consisting of atactic polypropylene (APP) or amorphous poly-α-olefin (APAO, APO)modified asphalt reinforced with polyester fiber covering with polyethylene surfacing. 
Base sheet:polyester felt,glass fiber felt.
Upper surface isolation material:PEmembrane,fine sand,mineral granules.
Lower surface isolation material:PEmembrane.
Thickness:3mm,4mm,5mm

The emulsified asphalt plant equipment

The emulsified asphalt plant equipment is desioned according to years of experience and the development .It is a  new modified emulsified asphalt production line, production of 18-20 tons / hour.

This equipment is settled on a foundation which is convenient for moving to another constructions site and working in the field. Its dimensions are designed according to the standard export container for   the convenience of transportation and cutting the freight.

Frequency governing motor  is used to control the rotation speed of asphalt pump. Emulsion flow rate is regulated by valve(displayed by the flow meter). By the above means, asphalt content in emulsified asphalt   (ratio of asphalt to water) can be accurately and stably controlled. In-line sampling valve of exclusive design could monitor the emulsified asphalt quality.

Pre-Sales Service

Welcome your visiting to our factory to see the running machine. 

Introduce every parts to you face-to-face.

On-Sales Service

Produce our products with quality and quantity before the deadline.

After-Sales Service

1.Engineers to guide the installation.
2.Training how to operate the machine. 
3.Engineers available to service machinery overseas.

Automatic Winding Machine

Parts of the modified bitumen waterproof membrane  production line 

1.Reinforcement unwinding device
2.Reinforcement splicting device
3.Reinforcement storing and drying device
4.Central aligner 
5.Recoating and tension control device
6.Asphalt coating device 
7.Sand-scattering device
8.Filming and thickness-measuring device 
9.Sand-pressing with uspending cooling device
10.Cooling and embossing device
11.Reinforcement storing and drying device 
12.Drawing-spring device
13.Auto winder machine
14.Mixing-weighing system
15.Storage tank 
16.Powder-conveying system
17.Fume treatment system
18.Heating with boiler system

SBS Self-Adhesive Waterproof Membrane Production Line

SBS self-adhesive waterproof membrane production line

Modified bitumen waterproofing membrane is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moistureprof. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon store and does not generate greenhouse gases. The membrane is therefore a sustainable way of storing carbon on the Earth's surface.

Self-Adhesive Waterproof Membrane

Introduction

SBS(Styrene Butadiene Styrene) /APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as SBS, APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc.

SBS/APP Bitumen Waterproof Membrane Production Line

Modified bitumen waterproofing membrane is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moistureprof. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon store and does not generate greenhouse gases. The membrane is therefore a sustainable way of storing carbon on the Earth's surface.

Emulsioned Asphalt Plant

The emulsified asphalt equipment is desioned according to years of experience and the development .It is a  new modified emulsified asphalt production line, production of 18-20 tons / hour.

The equipment consists of: Modified asphalt agitator tank,Metering device,Bitumen pump,Asphalt pump,Valve Pipeline ,Automatic valve,Oil pump,Colloid mill,Colloid mill circulating valve,Feeding platform,10#Iron asphalt tank,100#Iron asphalt tank,Talcum powder tank,oil storage,Screw powder hoist,Power distribution cabinet system,Electric wire,Feeding electric hoist and runway,Boiler,Tank, pipe insulation,and Heat conduction oil.

SBS/APP Modified Bitumen Waterproof Membrane

SBS/APP modified bitumen membrane is a kind of flexible sheet waterproof which uses Styrene Butadiene Styrene/SBS  thermoplastic rubber OR amorphous polypropylene (APP) as a dipping and covering modifier,whose upper surface is coated by PE film, fine sand, mineralgrain or aluminum foil or other isolating materials.The compound is a mixture of distilled bitumen,plastomers and elastomers which gives the membrane excellent resistance to heat aging and weathering. 

waterproof equipment Product features

waterproof equipment Product features:

1. Excellent waterproof performance. 
2. Good resistance to puncture, tear, corrosion, mold(fungus). 
3. Excellent flexibility. Strong adaptability for substrate shrinkage, deformation and cracks. 
4. Excellent resistance to aging, long service life. 
5. SBS modified bitumen membrane is resistant to high and low temperature, specially applied in the cold area. And it's easy and quick in construction. 
Application: 
SBS modified bitumen waterproof membrane is widely used in industrial and civil building, such as walls, basement, toilet waterproof; Bridge, road, parking lot, swimming pool, roof garden, tunnel, reservoir and other building. 

Especially suitable for the structure with frequent deformation and the building of cold area.

We are waterproof membrane manufacturers in china.

Property of HDPE Textured Geomembrane 

I. High flexibility, high waterproof coefficient
2. Could be used in the temperature of -700C - IIOoC
3. Good stability, anti acid and alkalis, anti-erosion
4. High climate bearing ability, excellent in anti-aging
5. High tensile strength and elongation, can be used in bad geology and climate, especially be
Used in the soil uneven sedimentation
6. High friction coefficient

We are waterproof membrane manufacturers.

We are waterproof membrane manufacturers.Polyvinyl Chloride (PVC) waterproof membrane is a new polymer waterproof membrane which is made from polyvinyl chloride resin, and mixed with plasticizer, filler, antioxygen, ultraviolet absorber and other auxiliaries.
Features
1)  Excellent aging resistance.
2)  Root resistant penetration, specially used on planting roof.
3)  Welding installation. Joints are solid and environment friendly, no pollution.
4)  High tensile strength, good elongation and dimensional stability.
5)  Good plasticity, easy and suitable for details installation.
6)  Fireproof. Fire extinguished out of the ignition resource.
7)  Surface is smooth, no fading and dirty resistant.
Applications
1)   All kinds of roofs, such as steel structure roof, planted roof etc.
2)   Underground engineering, such as building basement, subways, tunnels, air raid shelter, etc.

3)   Other projects like artificial lake, dam, water reservoir, grain storehouse, etc.

Self-Adhesive HDPE Bitumen Membrane Waterproofing for Underground

Self adhesive HDPE waterproof membrane,as high polymer waterproof membrane,is a combined self-adhesice waterproof membrane,which uses high polymer sheet as surface,and uses polymer modified asphalt,such as butyl and styrene-butadiene,as self adhesive material.It can not only solve the diffculties that high polymer problems during construction,at the same time,it combines some advantages of high polymer sheet and self-adhesive asphalt waterproof membrane. 

1.Features:Self-Adhesive HDPE Bitumen Waterproofing Membrane
1) Excellent physical performance, stable chemical performance.
High tensile strength and elongation,self-healing, penetration resistance, anti acid and alkali, temperature resistance and aging resistance.
2)Stickup and firm with cement paste and concrete.
Self-adhesive uses a unique formula, includes special active substances. Nontoxic and environmental friendly.
3)Advanced construction method, flexible, reliable, safety and environmental friendly.According to the constructions, APF-P can use pre-applied, wet-applied or hang-applied to construct. Use cement paste to bond with substrate, adjacent membranes use their self-adhesive layer to joint. No solvent and flame needed.